View MDF6-10DS-35C_40665.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

3.5mm Pitch Miniature Double Row Connector for Secondary Power (Product Compliant to UL/CSA Standard)
MDF6 Series
sFeatures
1. Pitch 3.5mm Miniature Type
This is a space saving miniature connector where the adjacent contact pitch is set to 3.5mm and the opposite length is set to 5mm double-row alignment.
Inner type full lock
2. Current Capacity Secures 7A
Despite miniature power connector, the current capacity 7A is secured using the AWG No.16 cable.
3. Box Type Header
The box type header secures scoop-proof insertion, and perfectly prevents mis-insertion.
4. Inner Type Full Lock Adopted
Adopting the inner type full lock which the locking area is not exposed to the outside, the connector can be engaged under the high reliable and stable conditions.
sApplications
Secondary power units for various equipment
Mis-insertion protector
B111
sProduct Specifications
AWG#16 : 7A Rating Current rating (Note1) Cable Size AWG#18 : 6A AWG#20 : 5A AWG#22 : 4A Voltage rating 300V AC Storage Temperature Range Storage Moisture Range -10 to +60c (Note3) -40 to 70% (Note3) Operating Temperature Range Operating Moisture Range -30 to +85c (Note2) -40 to 80%
Standard Value Applicant to the UL CSA Safety Standard Rating Current rating Voltage rating Item 1. Insulation Resistance 2. Withstanding voltage 3. Contact Resistance 5. Vibration 1000M ohms min No flashover or insulation breakdown. 30m ohms max No electrical discontinuity of 1s or more Specification 500V DC Cable Size AWG#16 to #18 : 6A AWG#20 to #22 : 4A 30V AC
sUL CSA Safety Standard File No. UL :E52653 CSA :LR95109
Condition 1500V AC/1 minute 100mA Measured at the steel pin with 1.520.760.002mm Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40c and humidity of 90% to 95% (-55c: 30 minutes 5 to 35c: 10 minutes (-85c: 30 minutes 5 to 35c: 10 minutes) 5 cycles 30 cycles Flow: 250c for 10 seconds Manual soldering: 300c for 3 seconds
4. Single Insertor/Extraction Force 0.4N(40gf) min., 4.9N(500gf) max. 6. Humidity (Steady state) Contact resistance: 30m ohms max.Insulation resistance: 500M ohms min. 7. Temperature Cycle Contact resistance: 30m ohms max:Insulation resistance: 1000M ohms min.
8. Durability (Mating/un-mating) Contact resistance: 30m ohms 9. Resistance to Soldering heat No deformation of components affecting performance.
Note 1: The rated current will be changed according to applicable cable sizes. The header rating only is 7A. Note 2: Includes temperature rise caused by current flow. Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
sMaterial
Product Crimping Socket Crimping Contact for Socket Pin Header Part Insulator Contact Insulator Contact Material Polyamide resin Phosphor copper Polyamide resin Brass Treatment White (Natural) Tin plated White (Natural) Tin plated Remarks UL94V-0 ----- UL94V-0 -----
sOrdering Information
qConnector qContact
MDF6
q q Series Name e Connector Type
- * DS - 3.5 C
w e r t : 3.5mm r Contact Pitch t Contact type C : Crimping socket DSA: Straight dip DS : Right angle dip
MDF6 - 1618 - SCF
q q Applicable Cable Size 1618 : AWG#16 to #18 2022 : AWG#20 to #22 w w Packaging Type SCF : Socket Contact, Reel SC : Socket Contact, Bag
: MDF 6
w Number of Contacts : 4 to 20 DS : Double row socket DP : Double row pin header
B112
sDouble Row Socket
Photo: Connected State
Unit: mm Part Number CL No. Number of Contacts A B C MDF6- 4DS-3.5C 547-0074-1 4 10.5 8.1 3.5 MDF6- 6DS-3.5C 547-0075-4 6 14.0 11.6 7.0 MDF6- 8DS-3.5C 547-0076-7 8 17.5 15.1 10.5 MDF6-10DS-3.5C 547-0077-0 10 21.0 18.6 14.0 MDF6-12DS-3.5C 547-0078-2 12 24.5 22.1 17.5 MDF6-14DS-3.5C 547-0079-5 14 28.0 25.6 21.0 MDF6-16DS-3.5C 547-0080-4 16 31.5 29.1 24.5 MDF6-18DS-3.5C 547-0081-7 18 35.0 32.6 28.0 MDF6-20DS-3.5C 547-0082-0 20 38.5 36.1 31.5 Note: A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag.
sSocket Crimping contact
qApplicable Cable (Tin plating Annealed Copper Wire)
Conductor Size (Wire construction) Jacket Diameter AWG #16 (26cores/0.254mm) AWG #18 (34cores/0.18 mm) O2.5 to O2.0mm AWG #20 (21cores/0.18 mm) AWG #22 (17cores/0.16 mm) O1.9 to O1.5mm Note: If other cables are used instead of the applicable cable, please contact Hirose sales department.
qRecommended Cable
UL1061, UL1007
qStrip Length
2.7 to 4.4mm
Part Number MDF6-1618SCF MDF6-1618SC MDF6-2022SCF MDF6-2022SC
CL No. 547-0070-0 547-0071-3 547-0072-6 547-0073-9
Applicable Cable AWG Size Jacket Diameter #16 to #18 #20 to #22 2.5 to 2.0 1.9 to 1.5
Packaging Type Reel Bag Reel Bag
Quantity 5000 100 5000 100
BApplicable Crimping Tool
Part Number CL No. Applicable Contact CM105 901-0005-4 ---------------AP105-MDF6-1618S 901-4512-4 MDF6-1618SCF Applicator AP105-MDF6-2022S 901-4513-7 MDF6-2022SCF MDF6-TA1618HC 550-0203-5 MDF6-1618SC Manual Crimping Tool MDF6-TA2022HC 550-0204-8 MDF6-2022SC Extraction Tool DF-C-PO(A) 550-0170-8 MDF6-****SC(F) Note: If any trouble has occurred due to other tools, which are not designated by Hirose, Hirose won't guarantee any products. Type Main press unit
B113
sDouble Row Pin Header: Straight Type
qBoard Hole Diameter : O1.3 +0.1 +0 qApplicable Board Thickness : 1.60.2 Unit: mm Part Number CL No. Number of Contacts 4 6 8 10 12 14 16 18 20 A 10.5 14 17.5 21 24.5 28 31.5 35 38.5 B 3.5 7 10.5 14 17.5 21 24.5 28 31.5 MDF6- 4DP-3.5DSA 547-0083-2 MDF6- 6DP-3.5DSA 547-0084-5 MDF6- 8DP-3.5DSA 547-0085-8 MDF6-10DP-3.5DSA 547-0086-0 MDF6-12DP-3.5DSA 547-0087-3 MDF6-14DP-3.5DSA 547-0088-6 MDF6-16DP-3.5DSA 547-0089-9 MDF6-18DP-3.5DSA 547-0090-8 MDF6-20DP-3.5DSA 547-0091-0
Note1: A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag.
sDouble Row Pin Header: Right Angle Type
qBoard Hole Diameter : O1.3 +0.1 +0 qApplicable Board Thickness : 1.60.2 Unit: mm Part Number MDF6- 4DP-3.5DS MDF6- 6DP-3.5DS MDF6- 8DP-3.5DS MDF6-10DP-3.5DS CL No. 547-0270-0 547-0271-2 547-0272-5 547-0273-8 Number of Contacts 4 6 8 10 A 10.5 14 17.5 21 B 3.5 7 10.5 14
Note1: A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag.
B114
BApplication Pattern
BPrecautions
1. Recommended Soldering Condition 2. Cleaning Condition 3. Connection Condition 4. Cautions Flow: 250c for 3 seconds Manual soldering: 290c for 2 seconds Refer to the "Nylon Connector Use Hand book". Refer to the "Nylon Connector Use Hand book". sThe color phase of this product is slightly different from that of the formed product according to the manufacturing lot and future storage conditions, but the difference doesn't affect the performance.
B115

▲Up To Search▲

Price & Availability of MDF6-10DS-35C

	To Download MDF6-10DS-35C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .